First, the cause of water leakage in the bathroom
Sometimes, when we install the toilet, if the connection is not good, the drainage pipe will flow outward, and there will be puddles for a long time. Therefore, when installing a toilet, care should be taken to ensure that the connection depth of the toilet drainage pipe and the drainage outlet is sufficient, and the connection should be tightly glued. To avoid the phenomenon of upward reflection, the humidity of the toilet is relatively high, so you must pay attention when doing waterproofing.
How to prevent leaks in the bathroom
1. The first is to check the cause of the leak, and carefully observe the location of the leak. The main reason for the leak in the bathroom is that the waterproof layer has not been prepared before, or we have used it for a long time. These are the causes of water leaks in the bathroom, so we need to check the corners, joints or pipe openings when we check. These are the main causes of water leakage.
2. The next step is to deal with water leakage. If it is a general small leak, it can be seen from the surface that there is now a king of plugging. This kind of product is easy to use, and it can be adjusted directly to the leaking place. If the leakage area is relatively large. Can't see from the surface again. This is more troublesome. At this time, the floor tile should be knocked off, and then the whole should be waterproofed.
3. If you feel that the method of knocking off the floor installation is troublesome, then you can go downstairs and look at the leak in that part directly, and instill the leak-proof liquid with high-pressure leak-proof method. The disadvantage of this method is that if you can't find the leak, you have to bridge the floor tiles.
3. What to pay attention to after waterproofing the bathroom
1. After the waterproof plugging is done, a second processing is required. Be sure to be meticulous and comprehensive in the second leak prevention. Don't think it's ok to take it aside. It's very troublesome to make a leak, so we'll do it right away. Rework is very troublesome.
2. When doing waterproofing, the surface must be kept clean to ensure that the ground is flat. If there are cracks or unevenness, it must be handled in advance. It cannot affect the effect of subsequent construction. And when you apply the waterproof paint, you must use even force, so that the ground will be smoother. Be careful not to have water before applying and keep the floor dry.
The reasons for some leaks in the bathroom are mentioned above. You should check your bathroom for the above phenomenon. In the aspect of bathroom waterproof leakage, we also introduced the specific steps of waterproofing. If you encounter water leakage in the bathroom, you can follow the above method. Pay attention when using. If you want to know more or have a need in this area, please feel free to consult Shaanxi Zhonghong Pipeline Engineering, professionally undertake the construction of Shaanxi waterproof plugging, pipeline engineering, waterproof engineering.